

Body Kits
Tesla Model 3 police car makes an appearance at law enforcement tech conference
A Tesla Model 3 police car made an appearance at the Accelerate Policing conference, an event hosted by law enforcement tech company Axon. The symposium was held in Phoenix, AZ, and it featured presentations and discussions on recent innovations for the law enforcement industry.
Images taken of the Model 3 police vehicle suggest that the electric car was specifically modified by Axon itself, as well as Tomar, a manufacturer of police car equipment. Wrapped in matte silver and white and emblazoned with the words “Police” in classic Tesla font, the Model 3 looked every bit like a police cruiser. Modifications such as a lightbar inside the cabin and police lights on the side mirrors also give the electric cruiser a distinctly futuristic look.
Quite interestingly, the Model 3 police car was fitted with what appeared to be 20″ wheels, which are great for performance but not really practical for police duty. The vehicle also appears to be a non-performance Model 3, due to the absence of red brake calipers.
While Axon’s Model 3 police car appears to have been built simply as a concept, the idea of using the electric sedan for law enforcement actually makes a lot of sense. Teslas have been used by police for years, though the high costs of the Model S and Model X have largely prevented their widespread use. This issue is not present with the Model 3, which costs significantly less than the premium sedan and SUV.

The Tesla Model 3 is quick on its feet thanks to the instant torque of its electric motors, and it’s durable thanks to its rigid aluminum frame. Being an electric vehicle, the Model 3 requires far less maintenance than a comparable gas or diesel-powered police car, and its operating costs are also significantly lower. The Model 3’s 1-million-mile drive unit and long-lasting battery pack further ensure that the vehicle could remain in service for a long time.
Police vehicles are subjected to a lot of use and abuse during their years of service. According to the Fremont PD, police cruisers drive around 40-70 miles a day on average, and each vehicle is driven hard on a consistent basis. From these requirements, it appears that the Standard Plus Model 3 could be a perfect fit for police duty, since it’s affordable enough for mass deployment while including all the advantages of its more expensive siblings. Axon’s Tesla Model 3 police car definitely looks the part. Perhaps, in the future, the Model 3 could even be as ubiquitous as the Crown Vic. One can only hope.
Body Kits
World’s fastest Tesla Model S Plaid undergoes major changes

You may have seen the formerly wrecked, then gutted 2022 Tesla Model S Plaid that had most of its body cut off and set the quarter mile record back in August, but now, it is a completely different creation dubbed the “Plaidessey.”
YouTube channel BoostedBoiz is making another major change by chopping off what little remained of the Plaid and dropping a 2001 Honda Odyssey body onto what’s left to create the “ultimate sleeper.”
In all fairness, the Odyssey body actually fits pretty well over the Model S, with less than two inches separating the wheelbase and only minor changes needed for the fenders.
One hurdle was the B pillar of the van not lining to where the Model S had its B pillar, but once the front windshield of the Model S was cut off, it made the accessibility into the car much easier.

The “Plaidessey” halfway through the changes (Credit: BoostedBoiz YouTube)
Before this major alteration, they set the Model S Plaid quarter mile world record by running 8.71 seconds down the dragstrip after cutting off the body and adding an aluminum shell to help with aerodynamics.
After setting the world record, they ran into another problem with the suspension getting stuck in low mode and even took it by a couple of Tesla dealerships in Florida to see if they could help with the issue. Unsurprisingly they weren’t able to get much help considering the changes made.
They were eventually able to enlist the help of Electrified Garage to help narrow down their issues and get a replacement part shipped out to fix the suspension.
Check out the transformation on the BoostedBoiz’s channel below!
What do you think of this creation from a 2022 Model S Plaid turned “Cyberkart” and now the “Plaidessey?”
Questions or comments? Shoot me an email at rangle@teslarati.com, or Tweet me @RDAnglePhoto.
Body Kits
Tesla Model S conversion project births stunning two-door convertible

The Tesla Model S was a subject of a conversion project at Ares’ Design, turning the flagship sedan into a stunning two-door convertible.
The Model S was Tesla’s second car behind the original Roadster from 2008. Since its original release in 2012, Tesla has made several small refinements to the car. One of the most notable is the omittance of the nosecone in favor of a new, more modern design. Tesla implemented this change in 2016, and it has been highly-accepted among the community.
Recently, rumors of a refresh to the Model S design have been circulating within the Tesla community. Because the flagship sedan and subsequent Model X vehicles have not been updated in several years, Tesla may be considering updating the design. While possibilities are endless and everyone has their opinion on what should be done, the folks at Ares Design in Modena, Italy put their own spin on the Model S, ridding it of the rear passenger doors and doing away with the top of the car.
- Credit: Ares Design
- Credit: Ares Design
- Credit: Ares Design
- Credit: Ares Design
- Credit: Ares Design
- Credit: Ares Design
The project started with the removal of the roof and central B-pillars, along with the rear doors. The wheelbase was then shortened to make the two-door design more reasonably aesthetic, and Ares designed their own doors that were fabricated to the specifications of the newly-refined Model S chassis. Structural reinforcements were added as well to ensure the safety of passengers.
Paired with interior upgrades that include new seating and a colorful new steering wheel with matching accents, the Model S from Ares is certainly one of the more interesting revisions to Tesla’s flagship sedan. However, it isn’t an ugly or unruly conversion by any means. However, some enthusiasts may have something to say about the revisions to the Model S’ design, as it was many early Tesla enthusiasts first EV.
Ares has many projects that will fit the taste of nearly every automotive enthusiast on Earth. With projects that span from Tesla to Lamborghini, there are several different routes the design studio has taken over the years to ensure the satisfaction of their customers and fans.
“At Ares, our co-create philosophy allows clients to work side by side with our designers and engineers to create their very own bespoke vehicle, a service that is unique to ARES,” CEO Dany Bahar said in a statement on the company’s website. “This Tesla project is a superb example of this; it was a pure coachbuilding project which we very much enjoy doing and seeing the results of our uncompromising standards.”
What do you think? Leave a comment down below. Got a tip? Email us at tips@teslarati.com or reach out to me at joey@teslarati.com.
Body Kits
Unplugged Performance Tesla Model 3 in Street Spec Beats Legendary McLaren F1 at Tsukuba

A Tesla Model 3 Performance with modifications from EV tuning house Unplugged Performance has achieved an elusive feat. During a run in Japan’s Tsukuba Circuit, a location famed for its twists and turns, the modified all-electric sedan managed to beat the record of a legendary naturally aspirated supercar, the McLaren F1, with an impressive lap time of 1:03.3.
What’s rather interesting is that the Model 3 Performance was actually in its street settings when it was brought to the track, and its driver was a neophyte with electric cars. While the vehicle had a slew of modifications, the Model 3 was not tuned or modified specially for the Tsukuba Circuit. It was even equipped with OEM tires from a Porsche 911 GT3 RS (997), which are good on the track but also great for regular driving.
The Model 3 that was used for the Tsukuba Circuit run was the same car that Unplugged Performance brought to the Tokyo Auto Salon. The vehicle, which belongs to Tesla owner enthusiast Erik Strait and dubbed as the Model 3 Ascension R, was brought over to Japan this January following its showcase at the SEMA 2019 show. The all-electric car was showcased in Japan as a way to demonstrate how classic tuning methods could be applied for high-performance EVs.
It should be noted that its record-breaking lap was not the first time Unplugged Performance’s Model 3 Ascension R was brought to Tsukuba Circuit. After its appearance at the Tokyo Auto Salon, the vehicle was brought to the track, where it came close to beating the McLaren F1’s lap record with a time of 1:04.7. This was just one-tenth of a second slower than the McLaren F1’s record of 1:04.6.
While the McLaren F1 is no longer the world’s fastest supercar today, the vehicle remains one of the most formidable forces of automotive engineering ever created. The car, which saw production between 1992 to 1998, was considered groundbreaking and insane at the same time. In 1998, the F1 took the title as the world’s fastest production car with a speed of 240.1 mph, and it held on to its crown until it was beaten by the Koenigsegg CCR in 2005. Even decades after its release, the McLaren F1 remains the world’s fastest naturally-aspirated production car in the industry.
For Unplugged Performance CEO Ben Shaffer, The Tesla Model 3 Ascension R is a love song of sorts to his background in JDM vehicles. It’s a fast electric car that is very capable on the track, of course, but it is also a proper road car that can be used for everyday driving.